Feb 9, 2015

 Agenda

Baja II Senior Design Meeting
Date: 2/9/15
Time: 12:30 pm – 1:30 pm
Location: Stinson Remick 207
Meeting Leader: Anthony Nguyen
Minutes: Sam Flores
Attendees: Sam Flores, Eric Jesse, Maggie McGonigle, Anthony Nguyen, Prof. Mike Schafer

1. Discuss Individual Assignments and Current Status
   1. Memory Storage
   2. LCD Touch Screen
   3. GPS
   4. Hall Effect Sensors & Temperature Sensors
2. Discuss Last Minute Problems In Preparation for Design Review I
   1. Problems with code or set up procedures
3. Discuss and Assign Action Items
   1. Finishing Code for Design Review I
   2. Assign sections of final report documentation
   3. Deadline is next week

 Minutes

Baja II Senior Design Meeting Minutes
Date: 2/11/15
Time: 12:30 pm – 1:30 pm
Location: Stinson Remick 207
Meeting Leader: Anthony Ngyuen
Minutes: Sam Flores
Attendees: Maggie McGonigle, Anthony Ngyuen
                      Eric Jesse, Prof. Mike Schafer
 

Memory Storage:

• SPI Data save working, still working on downloading part
• Have to be careful with bits because UART can only handle 8 bits at a time though data might be 16 bits

Touch Screen:

• Touch screen itself is functional
• Code still has to be tested
• The connection is probably through UART

GPS

• Still working on code
• Receiver commands should be sent as arguments in a mplabx functions through some sort of serial connection
• Last byte is check sum for receiver
• Use logic analyzer to confirm what is happening

RPM & Temperature

• Temperature code is up and running. Can display Celsius and Fahrenheit.
• Still working on RPM code; counter is not initializing at 0

General

• Everyone will demonstrate subsystem using mx kit board
• Demo time 12:30 pm on Friday, 2/20/15
• Action items:
  • Finish up code
  • Start working on sections of report based on subsystems

This Web Page was Built with PageBreeze Free HTML Editor